A classic door with two profiled panels.
Lowest Price Guaranteed
Image shown for illustrative purposes only. Doors and drawer fronts should be ordered individually.
How to measure doors and drawers
- Always measure the back of the door, not the front
- Measure the height first, then the width
How to measure hinge holes
Distance from top of door to centre of hole
Distance from bottom of door to centre of hole
Measure from the top or bottom of the door to the centre of the hole
Click to select
Top Open Frame
Square Hole Frame
Not Available in High Gloss finishes.
Full Open Frame
5 Hole Frame
How to measure Sloping Doors
What is the cornice?
- Cornice is the trim that sits at the top of the wall unit.
Modern Cornice Pelmet
What is the pelmet?
- Pelmet is the trim that sits at the bottom of the wall unit.
2500mm long - 200mm high at ends
What is the plinth?
- Plinth is the trim that sits at the bottom of the base unit.
Plinth (2400mm long)
Any Height between 100 and 200mm. 2400mm long
Profiled Plinth (2400mm long)
Any Height between 100 and 200mm. 2400mm long. The profiled edge plinth is designed to match the style of any doors you choose.
What are corner posts?
Corner Post - 720m length x 30m x 30m
Corner Post - 720m length x 40m x 40m
720m lenght x 40m x 40m
What are panels?
Tongue and Groove Panel
Made to Measure - minimum size: 60mm x 250mm, maximum size: 2540mm x 1220mm. Minimum charge applies. Please refer to the door product page for the panel specification.
Square Edge Panel
Profiled Edge Panel
What is self-adhesive vinyl?
What is non-adhesive vinyl?
1000mm wide, can be cut to 700mm wide
Front panel supplied to match door style.
Wine Rack Rail
100mm x 1200 mm
Plain Wine Rack Front
For Cleaning high gloss Doors. Only use Microfibre cloth.
This item cannot be shipped to Northern Ireland and Republic of Ireland.
T Bar Handle
From 136mm to 526mm long. Brushed nickel. Check options for hole centres.
Aries Bar Handle
From 156mm to 476mm long. Stainless steel. Check options for hole centres. Screws not included.
Keyhole Bar Handle
From 153 to 657mm long. Stainless steel effect. Check options for hole centres. Screws not included.
144mm long - 128mm hole centres - screws not included. Stainless Steel Effect.
From 111mm to 332mm long. Steel. Check options for hole centres.
Chunky Bow Handle
153mm long - 128mm hole centres - screws not included. Matt Nickel Finish.
Tapered Bow Handle - Matt Nickel
185mm long - 128mm hole centres - screws not included. Matt Nickel Finish.
Tapered Bow Handle - Chrome
185mm long - 128mm hole centres - screws not included. Polished Chrome Finish.
Punched Bow Handle
162mm long - 128mm hole centres - screws not included. Matt Nickel.
Dimple Handle - Matt Nickel
158mm long - 128mm hole centres - screws not included. Matt Nickel Finish.
Dimple Knob - Matt Nickel
33mm diameter - ex screw. Matt Nickel.
Dimple Handle - Chrome
158mm long - 128mm hole centres - screws not included. Polished Chrome.
Dimple Knob - Chrome
33mm diameter - ex screw. Polished Chrome.
Square D Handle
114mm long - 96mm hole centres - screws not included. Polished Chrome.
172mm long - 96mm hole centres - screws not included. Matt Nickel.
Shaker D Handle
129mm long - 96mm hole centres - screws not included. Stainless Steel Effect.
64mm hole centres - screws not included. Stainless Steel Effect.
32mm diameter - screws not included. Polished Chrome.
Brushed Nickel Knob
32mm diameter - screws not included. Brushed Nickel.
24mm diameter - ex screws. Stainless Steel Effect.
Antique Latch Handle
124l x 64h - screws not included. Antique Pewter Finish.
Antique Bow Handle
133l x 96h - screws not included. Antique Pewter Finish.
Hammered D Handle
155l x 96h - screws not included. Antique Pewter Finish.
34mm diameter - inc screws. Antique Pewter Finish.
Light Oak Knob
43mm diameter - screws not included. Light Oak Lacquer.
44mm diameter - screws not included. Unfinished
White Ceramic Knob
38mm diameter - screws not included. White Ceramic.
Door Handle Drilling Jig
For easy and accurate marking of handle positions. Heavy duty plastic.
Snap off handle screws (Pack of 100)
Snap off handles screws M4 - 40mm long - Pack of 100.
110 Degree Standard Hinge
165 Degree Standard Hinge
Corner Unit Hinge (L Shape)
Top Flap Hinge (Pair)
No Hinge Holes Required
110 Degree Soft Close Hinge
160 Degree Soft Close Hinge
45 Degree Soft Close Diagonal Corner Unit Hinge
Hinge and Drawer Runner Fixing Screws (Pack of 1000)
Pack of 1000 (3.5 x 15mm)
Steel joining plates and screws
Consists of: 2x Flat plate and 8x Hospa screw CS 3.5x15mm
Shallow Plywood Drawer Box
Deep Plywood Drawer Box
Drawer Runner Spacer
For 15mm Thick Carcass (use 3 per side). For use with Plywood drawer boxes.
Beech Cutlery Insert
Fits 450mm wide cabinets and above. For use with Plywood drawer boxes.
Double Sided Self Adhesive Foam Tape
19mm x 25m Roll. For use with Plywood drawer boxes.
Drawer Runner and Hinge Fixing Screws
Soft Close Drawer Box and Runners
Soft Close Pan Drawer Box and Runners
Drawer Front Marking / Drilling gauge
For drawer front fixing brackets.
Cutlery Insert - Moulded Plastic
For use with Soft Close drawer boxes.
What are wall end shelf units?
Wall End Shelf Unit - Angled
Wall End Shelf Unit - Square
What are base end shelf units?
Base End Shelf Unit - Angled
720mm x 570mm x 300mm - Flat Pack, Including assembly fittings.
Base End Shelf Unit - Square
720mm x 570mm x 300mm - Flat Pack, Including assembly fittings
Single Base Unit
150mm x 570mm x 720mm
300mm x 570mm x 720mm
400mm x 570mm x 720mm
500mm x 570mm x 720mm
600mm x 570mm x 720mm
Built Under Oven Housing
Double Base Unit
700mm x 570mm x 720mm
800mm x 570mm x 720mm
900mm x 570mm x 720mm
1000mm x 570mm x 720mm
L Shaped Corner Base Unit
928mm x 928mm x 720mm
Single Wall Unit
300mm x 330mm x 720mm
400mm x 330mm x 720mm
500mm x 330mm x 720mm
600mm x 330mm x 720mm
Double Wall Unit
700mm x 330mm x 720mm
800mm x 330mm x 720mm
900mm x 330mm x 720mm
1000mm x 330mm x 720mm
L Shape Corner Wall Unit
628mm x 628mm x 720mm
Bridge Wall Unit
500mm x 330mm x 360mm
600mm x 330mm x 360mm
900mm x 330mm x 360mm
Tall Larder Unit
300mm x 570mm x 1970mm
400mm x 570mm x 1970mm
500mm x 570mm x 1970mm
Tall Larder / Appliance Unit
600mm x 570mm x 1970mm
300mm - 2 Fixed and 2 Adjustable Shelves
400mm - 2 Fixed and 2 Adjustable Shelves
500mm - 2 Fixed and 2 Adjustable Shelves
600mm - 2 Fixed and 2 Adjustable Shelves
Two Tier Base Unit Pull Out
477mm Deep. Right Hanging Frame.
300mm Two Tier Base Unit Pull Out
Wire Basket - Drawer
Fits 500mm Unit - 450mm Deep. Door / Drawer fixing kit and acrylic base extra.
Fits 400mm Unit - 455mm Deep. Runners Sold Separately.
Wicker Basket Runners
Pre-drilled. Beech Finish
Larder Unit Pull Out
Extendable 1700 to 1950mm. 5 Baskets.
0 Items in your quote
Total Price: £0.00
To save your quote , fill in the details below.
You will receive an email with a link to your quote so you can continue when you're ready.
Your quote has successfully been saved.
You will shortly receive an email with a link allowing you to continue from this point at a later date.
These are necessary for the site to work. Without them, you may not be able to move around the site smoothly. Click for more information
These help us analyse how people use the site – the pages they visit most, the times site traffic is highest, and conversion rates, to name just a few things we measure. Click for more information
These are used with Google Adwords and Bing. Click for more information