Milan Vanilla Kitchen Doors
A simplified Shaker door with a slightly narrower frame than the standard Shaker design.
Delivering over 15,000 kitchen doors a month – every month
Helping people replace their kitchen doors for 26 years
From £2.99 - Lowest price guaranteed
view other colours:
view other styles:
Image shown for illustrative purposes only. Doors and drawer fronts should be ordered individually.
Inspired by the Shaker design but with a pared-down look, the Milan door has a slightly narrower frame than the traditional Shaker, and a simple recessed centre panel. If you’re looking to create a kitchen that feels airy and modern but not too plain or stark, the Milan door is the perfect choice. Sleek bar or simple D-shaped handles will be the ideal finishing touches for the coolly elegant Milan door.
A warm-toned neutral, Vanilla is a soft, creamy shade that will fill your kitchen with gentle light. A subtle, elegant finish like Vanilla works in modern spaces and traditional kitchens alike. Vanilla is just as versatile as plain white, though – so you have plenty of freedom when it comes to choosing colours and finishes for your walls, flooring and worktops. Golden woodgrain flooring and worktops will add warmth and a touch of modern rustic style, while neutrals like oatmeal and taupe will create a calming, tonal look.
We do our best to produce accurate images but there may be some slight variation between how the colour appears on your screen and how it looks on the door. We always recommend ordering free colour swatches or purchasing a sample door so you can see exactly what your colour choice will look like.
Please note that doors and drawer fronts are sold separately. Our images show doors with their corresponding drawer fronts, but this is for illustrative purposes only.
|Door Thickness (mm)||18|
|Minimum height (mm)||100|
|Minimum width (mm)||100|
|Maximum door/drawer height (mm)||2400|
|Maximum door/drawer width (mm)||1200|
|Door Frame Width (mm)||100|
|Colour Grain Direction||Vertical|
|Minimum door height for internal design (mm)||283|
|Minimum door width to have an internal design (mm)||245|
|Minimum drawer height to have an internal design (mm)||100|
|Minimum drawer width to have an internal design (mm)||245|
|Finishes||Satin - Matt|
Products from our Integrity range are certified by the FSC to ensure our timber-based raw material is sourced from controlled, well managed and sustainable forests.
Milan door specification
- All doors are FIRA tested and approved
- 6 year manufacturers warranty as standard
- Manufactured from 18mm thick MDF - with a hardwearing, wipeable vinyl surface, in a wide choice of plain colours and woodgrain finishes
- Timber based raw materials are obtained from controlled, well managed and sustainable sources
- Manufactured in the UK
Drawer fronts are supplied with horizontal grain in all colours. Drawer front design is supplied on all sizes up to 282mm high. The minimum height is 100mm and minimum width 100mm. The maximum width is 1200mm.
Doors are supplied with vertical grain in all colours.
Height 283mm to 1729mm will be supplied as a door without midrail.
Height 1730mm to 2400mm will be supplied with midrail. Doors with a midrail will be split 70/30 with a top and bottom panel, separated by the midrail. If you want the midrail at a different height please specify this on your order form.
The largest door we manufacture is 2400mm high by 1200mm wide.
Frame doors are supplied unglazed, with a rebated back and a soft glazing gasket. Doors can be supplied as Open Frames or Georgian Frames.
The minimum height for panels is 100mm, and the minimum width is 100mm. Maximum width is 1200mm. The grain direction of panels will match the doors - except panels below the height of 282mm, which will be supplied with horizontal grain unless stated otherwise. The backs of panels will match the backs of the doors. Unless specified on order panels will automatically be supplied as 18mm.
Drilling for hinges and handles
We offer a hinge hole drilling service at a modest cost.
Please let us know your hinge hole measurements and we will drill them accordingly. Measure from the top or bottom of the door to the centre of the hinge hole. If you need any guidance on measuring for hinges, watch our DIY help videos or give us a call.
You can have your hinge holes drilled from 60mm from the bottom and top edge of the door.
We are unable to drill for handles.
Matching door backs
The term 'matching back' means that the door will have a similar coloured melamine back, rather than a vinyl back and as such the colour and texture may be different from the front of the door. In particular textured and high gloss colour doors will be supplied with a matt smooth finish back.
All doors are supplied with matching finish backs with the following exceptions:
|High Gloss Mira Cosa||Black back|
|Light Concrete||Dove Grey back|
|Dark Concrete||Grey back|
Horizontal grain is available in all woodgrain colour options up to 1245mm high.
Standard wood grain colours are available up to 1245mm high.
The same applied to wine rack fronts, modern canopies, plain canopies, T&G canopies. PVC panels and are made as specified.
High gloss colours
High gloss finishes are manufactured using a heavier gauge vinyl and as such definition can be less sharp on items which have more detailed designs.
Please refer to our Care and Maintenance guide for information on how to protect and care for your doors.
Order before 3:45 pm on 22/01/2022 to receive it by 16/03/2022
- Free delivery on orders over £100
- Delivery £15.99 on orders up to £100
- Free delivery on sample doors
We are unable to deliver to the Highlands and islands of Scotland, or to any other islands, but we can deliver to a mainland courier company on your behalf for onward shipping.
For certain postcodes in Scotland, there will be a delivery surcharge – please contact us for more details.
Write Your Own Review