Trends Wadhurst Kitchen Doors
Wadhurst doors offer a tasteful and attractive look to any kitchen. The profiled edges of the doors are perfectly highlighted by the curved centre panel which, in turn, is offset by planking detailing. Wadhurst doors from our Trends style range are traditional in terms of their look but modern and confident when it comes to their convenience and maintenance. These doors meet all the criteria of modern life and will work in any environment.
Refineopen close filter
- Made to Measure
- Trends 20% off
Free Colour SwatchesOrder Swatch
DIY Video GuidesView Videos
Why not try changing your search parameters or click here to view the full Trends range.
Wadhurst Door Specification
- 6 Year Manufacturer's Warranty as standard
- Manufactured from 18mm thick MDF with a hardwearing, wipeable vinyl surface, in a wide choice of plain and wood grain finishes.
- Timber based raw materials used in the production of Trends doors are obtained from controlled, well managed and sustainable sources
- Manufactured in the UK
|Minimum Drawer height to have an internal design||N/A|
|Drawers below this height will have a plain centre.|
|Minimum Drawer width to have an internal design||N/A|
|Drawers below this width will have a plain centre.|
|Minimum Door height||283mm|
|Doors below this height will be made as a drawer front.|
|Maximum Door Height||2540mm|
|Minimum Door width to have an internal design||246mm|
|Doors below this width will have a plain centre.|
|Maximum Door / Drawer width||1200mm|
Drawer front design is supplied on all sizes up to 282mm high. The minimum height is 60mm and minimum width 100mm. Maximum width 1200mm. Drawer fronts are supplied with horizontal grain unless specified otherwise.
Some handles will not fit small drawer fronts and care should be taken before fitting to ensure that the handles you have chosen will fit the size and style of doors/drawers that you have chosen.
Doors are supplied with vertical grain.
The dimensions of a door will determine the type of door supplied. Height 283mm to 1699mm will be supplied as a door without a midrail. Height 1700mm to 2540mm will be supplied with a midrail. Doors with a mid rail will have it supplied at 655mm from the bottom edge to its centre as standard. If you want the mid rail at a different height please specify this on your order form.
The largest door we manufacture is 2540mm high by 1200mm wide.
Frame doors are supplied unglazed, with a rebated back and a soft glazing gasket. Doors can be supplied as Open Frames or Geogian Frames. Tall doors supplied with a mid rail can have full open frames (ie with no mid rail), top open frames or top and bottom open frames. Please specify when ordering.
Georgian frames will be supplied as follows:
|Up to 800mm high||4 panes|
|801 - 1100mm||6 panes|
|Over 1100mm high||8 panes|
The minimum height for panels is 60mm, and the minimum width is 100mm. Maximum width is 1200mm. The grain direction of panels will match the doors - except panels below the height of 282mm, which will be supplied with horizontal grain unless stated otherwise. The backs of panels will match the backs of the doors.
Handles are not supplied as standard, please choose any handle you wish from our range, or fit your own.
Drilling for Hinges and Handles
We offer a hinge hole drilling service at a modest cost. Unless you specify otherwise our standard drilling positions are 100mm from the top and bottom of the door.
You can have your hinge holes drilled in any position that you specify.
We are unable to drill for handles.
Matching Door Backs
The term 'matching back' means that the door will have a similar coloured melamine back, rather than a vinyl back and as such the colour and texture may be different from the front of the door. In particular Legno colour doors will be supplied with a smooth finish back.
All doors are supplied with matching finish backs with the following exceptions:
|High Gloss Anthracite||Silver back|
|High Gloss Aubergine||Silver back|
|High Gloss Black||Black back|
|High Gloss Cappuccino||Cream back|
|High Gloss Cream||Cream back|
|High Gloss Metallic Black||Black back|
|High Gloss White||White back|
|Melinga Oak||Black back|
Horizontal grain is available as a special request in all wood grain colour options. High gloss colours are available with horizontal grain up to 1200mm high. Standard wood grain colours are available up to 1245mm high.
The same applies to wine rack fronts, modern canopies, plain canopies, T&G canopies and PVC panels, and are made as specified.
High Gloss Colours
High gloss finishes are manufactured using a heavier gauge vinyl and as such definition can be less sharp on items which have more detailed designs.
Care & Maintenance
Please refer to our Care and Maintenance guide for information on how to protect and care for your doors.