Colours

We do our best to produce accurate images but there may be some slight variation between how the colour appears on your screen and how it looks on the door. We always recommend ordering free colour swatches or purchasing a sample door so you can see exactly what your colour choice will look like.

Door images

Please note that doors and drawer fronts are sold separately. Our images show doors with their corresponding drawer fronts, but this is for illustrative purposes only.

Newick door specification

• Manufactured from 18mm thick MDF with a hardwearing, wipeable vinyl surface, in a wide choice of plain and woodgrain finishes.
• 6 year manufacturer's warranty as standard
• Products from our Trends range are FSC and PEFC certified, ensuring our timber-based raw material is sourced from controlled, well managed and sustainable forests.
• Manufactured in the UK.

Drawer fronts

Drawer front design is supplied on all sizes up to 282mm high. The minimum height is 80mm and minimum width 80mm. Maximum width is 1200mm. Drawer fronts are supplied with horizontal grain unless specified otherwise.

Some handles will not fit small drawer fronts and care should be taken before fitting to ensure that the handles you have chosen will fit the size and style of doors/drawers that you have chosen.

Doors

Doors are supplied with vertical grain.

This style of door does not come with a mid rail.

The largest door we manufacture is 2540mm high by 1200mm wide.

Frame doors

Frame doors are supplied unglazed, with a rebated back and a soft glazing gasket. Doors can be supplied as Open Frames or Georgian Frames. Tall doors supplied with a midrail can have full open frames (i.e. with no midrail), top open frames or top and bottom open frames. Please specify this when ordering.

Georgian frames will be supplied as follows:

Panels

The minimum height for panels is 80mm, and the minimum width is 80mm. Maximum width is 1200mm. The grain direction of panels will match the doors - except panels below the height of 282mm, which will be supplied with horizontal grain unless stated otherwise. The backs of panels will match the backs of the doors.

Handles

Handles are not supplied as standard, please choose any handle you wish from our range, or fit your own.

Drilling for hinges and handles

All doors come undrilled as standard.  However, we offer a hinge hole drilling service at a modest cost.

Please let us know your hinge hole measurements and we will drill them accordingly. Measure from the top or bottom of the door to the centre of the hinge hole. If you need any guidance on measuring for hinges, watch our DIY help videos or give us a call.

You can have your hinge holes drilled from 60mm from the bottom and top edge of the door.

We are unable to drill for handles.

Matching door backs

The term 'matching back' means that the door will have a similar coloured melamine back, rather than a vinyl back and as such the colour and texture may be different from the front of the door. In particular, textured and high gloss colour doors will be supplied with a smooth matt finish back.

All doors are supplied with matching finish backs with the following exceptions:

Horizontal grain

Horizontal grain is available as a special request in all woodgrain colour options. High gloss colours are available with horizontal grain up to 1200mm high. Standard woodgrain colours are available up to 1200mm high.

The same applies to wine rack fronts, modern canopies, plain canopies, T&G canopies and PVC panels, and are made as specified.

High gloss colours

High gloss finishes are manufactured using a heavier gauge vinyl and as such definition can be less sharp on items which have more detailed designs.