Washington Beech Kitchen Doors
Delivering over 15,000 kitchen doors a month – every month
Helping people replace their kitchen doors for 25 years
From £3.19 - Lowest price guaranteed
view other colours:
view other styles:
Beech is a classic natural, and what better wood finish to go with our classic Washington design from the Trends range?
The Washington design follows a Shaker design. The Shakers were known for the simplicity of their design aesthetic as well as for a simple way of life, and we like this idea! So we have made everything about the Washington simple ? it’s simple to install, and simple to clean and care for when you have installed it.
We have lots of videos on our website to make sure that you don’t go wrong when you’re putting your new kitchen doors in, and we’ve written plenty of articles covering all the details we can think of. We’re confident we’ve covered everything! If you want to know how your new door will look in situ, just order one door to check, and don’t forget to ask for a colour swatch kit to look at all the options. We also have a show room so that you can come along and have a look at everything in real life. Come and visit us any time! We can give you help and advice on your colour and finish choices. Then you go home, measure up and make your order. Don’t forget the extras, like handles and hinges.
In the Trends range we pride ourselves on our wood range, and with the Washington door in Beech, you’ll know you made the classic choice for a kitchen that will be admired by all your friends!
We do our best to produce accurate images but there may be some slight variation between how the colour appears on your screen and how it looks on the door. We always recommend ordering free colour swatches or purchasing a sample door so you can see exactly what your colour choice will look like.
Please note that doors and drawer fronts are sold separately. Our images show doors with their corresponding drawer fronts, but this is for illustrative purposes only.
|Door Thickness (mm)||18|
|Minimum height (mm)||60|
|Minimum width (mm)||60|
|Maximum door/drawer height (mm)||2540|
|Maximum door/drawer width (mm)||1200|
|Door Frame Width (mm)||90|
|Door Midrail||Frame Width x 2|
|Colour Grain Direction||Vertical|
|Minimum door height for internal design (mm)||283|
|Minimum door width to have an internal design (mm)||220|
|Finishes||Satin - Matt|
Drawer front design is supplied on all sizes up to 282mm high. The minimum height is 60mm and minimum width 100mm. Maximum width is 1200mm. Drawer fronts are supplied with horizontal grain unless specified otherwise.
Some handles will not fit small drawer fronts and care should be taken before fitting to ensure that the handles you have chosen will fit the size and style of doors/drawers that you have chosen.
Doors are supplied with vertical grain.
The dimensions of a door will determine the type of door supplied. Height 283mm to 1699mm will be supplied as a door without a midrail. Height 1700mm to 2540mm will be supplied with a midrail, which will be double the width of the frame. Doors with a midrail will have it supplied at 655mm from the bottom edge to its centre as standard. If you want the midrail at a different height please specify this on your order form.
The largest door we manufacture is 2540mm high by 1200mm wide.
Frame doors are supplied unglazed, with a rebated back and a soft glazing gasket. Doors can be supplied as Open Frames or Georgian Frames. Tall doors supplied with a midrail can have full open frames (ie with no midrail), top open frames or top and bottom open frames. Please specify thi when ordering.
Georgian frames will be supplied as follows:
|Up to 800mm high||4 panes|
|801mm - 1100mm||6 panes|
|Over 1100mm high||8 panes|
Handles are not supplied as standard, please choose any handle you wish from our range, or fit your own.
Drilling for hinges and handles
We offer a hinge hole drilling service at a modest cost.
Please let us know your hinge hole measurements and we will drill them accordingly. Measure from the top or bottom of the door to the centre of the hinge hole. If you need any guidance on measuring for hinges, watch our diy help videos or give us a call.
You can have your hinge holes drilled from 60mm from the bottom and top edge of the door.
We are unable to drill for handles.
Matching door backs
The term 'matching back' means that the door will have a similar coloured melamine back, rather than a vinyl back and as such the colour and texture may be different from the front of the door. In particular, textured and high gloss colour doors will be supplied with a smooth matt finish back.
All doors are supplied with matching finish backs with the following exceptions:
|High Gloss Anthracite||Silver back|
|High Gloss Cappuccino||Cream back|
|Brushed Steel||Silver Back|
|High Gloss Metallic Blue||Silver Back|
Horizontal grain is available as a special request in all woodgrain colour options. High gloss colours are available with horizontal grain up to 1200mm high. Standard woodgrain colours are available up to 1200mm high.
The same applies to wine rack fronts, modern canopies, plain canopies, T&G canopies and PVC panels, and are made as specified.
High gloss colours
High gloss finishes are manufactured using a heavier gauge vinyl and as such definition can be less sharp on items which have more detailed designs.
Order before 4:00 pm on 17/04/2021 to receive it by 29/04/2021
- Free delivery on orders over £300
- Delivery £15.99 on orders up to £100
- Delivery £30 on orders £101-£299
- Free delivery on sample doors
We are unable to deliver to the Highlands and islands of Scotland, or to any other islands, but we can deliver to a mainland courier company on your behalf for onward shipping.
For certain postcodes in Scotland, there will be a delivery surcharge – please contact us for more details.