Colours

We do our best to produce accurate images but there may be some slight variation between how the colour appears on your screen and how it looks on the door. We always recommend ordering free colour swatches or purchasing a sample door so you can see exactly what your colour choice will look like.

Door images

Please note that doors and drawer fronts are sold separately. Our images show doors with their corresponding drawer fronts, but this is for illustrative purposes only.

Door specification

• 6 year manufacturer's warranty as standard
• Manufactured from 18mm thick MDF and MFC with Acrylic, PET and PVC finishes - hardwearing and wipeable surfaces available in a range of stunning glosses, matts and woodgrains
• Timber based raw materials used in the production of Visions doors are obtained from controlled, well managed and sustainable sources
• Manufactured in the UK

Drawer fronts

Drawer fronts up to 283mm high are supplied with horizontal grain.

Doors

Doors are supplied with vertical grain.

The dimensions of a door will determine the type of door supplied and the grain direction.

Visions Blue, Anthracite and Champagne colours are directional as marked by the arrows on the protective film. The arrows must point upward when fitted. Please make sure to specify right and left hand opening, if you are opting to have your doors drilled.

The largest door we manufacture is 2400mm high by 1200mm wide.

Panels

The minimum height for panels is 100mm, and the minimum width is 100mm. Maximum width is 1200mm. The grain direction of panels will match the doors - except panels below the height of 282mm, which will be supplied with horizontal grain unless stated otherwise. The edge type of the panels will match the edge type of the doors, unless specified otherwise. The backs of panels will match the backs of the doors.

Handles

Handles are not supplied as standard, please choose any handle you wish from our range, or fit your own.

Drilling for hinges and handles

All doors come undrilled as standard.  However, we offer a hinge hole drilling service at a modest cost.

Please let us know your hinge hole measurements and we will drill them accordingly. Measure from the top or bottom of the door to the centre of the hinge hole. If you need any guidance on measuring for hinges, watch our DIY help videos or give us a call.

You can have your hinge holes drilled from 60mm from the bottom and top edge of the door.

We are unable to drill for handles.

Door back colour

All doors are supplied with a matching back, except Ultragloss Chocolate, Ultragloss Red and woodgrain colours, which come with a silver back.

Horizontal grain

Horizontal grain is available in all wood grain colour options. High gloss colours are available with horizontal grain up to 1200mm high.

Standard wood grain colours are available up to 1245mm high.

Care & maintenance

Please refer to our Care & Maintenance guide for information on how to protect and care for your doors.